LSA.BOB-M LAUDA MOBİLE SURFACE ANALYZER

mobile measuring instrument with innovative top view technology. suitable for measurements on surfaces with complex topography and onsite inspections highest precision for any contact angle range due to young-laplace fit of the drop. suitable for all drop sizes and liquids no limits for sample size surface mapping of the wetting properties with high spatial resolution down to 5mm, optional robot system and automatic sample stages optional automatic dosing system for measurements both on horizontal and vertical surfaces

Single Burning Item (SBI)- EN 13823

Tek Yanma Maddesi (SBI), tek bir yanma maddesi (propanla birlikte verilen bir kumlama ocağı) tarafından termal saldırıya maruz kaldığında, yapı ürünlerinin (zeminler hariç) yangın davranışına tepkisinin belirlenmesi için bir test yöntemidir.

ISF1-X (Climo-Shaker)

Mikrobiyal, memeli ve bitki hücresi uygulamaları için istiflenebilir inkübatör çalkalayıcı

Saccharomat® V

Measurement scales  °Z International Sugar Scale Measuring ranges – 35°Z to + 105°Z Resolution 0.01 °Z Precision ± 0.01 °Z Reproducibility ± 0.01 °Z Sensitivity Up to OD 5 Wavelength  1 or 2 wavelengths fixed: 587, 882 nm Response time ≤ 4 sec. over the entire measuring range Measuring tubes Different Models,  50, 100 or 200 mm length, Material: glass, stainless steel, acid-proof stainless steel, stainless steel tubes with integrated temperature sensor*** Temperature measurement NTC sensor for measurement of sample temperature Range 0 °C – 99 °C Resolution 0.01 °C Precision ± 0.1 °C Light source LED, interference filter Display  7″ TFT Touchscreen, 800 x 480 Pixel, 16 Bit colors Operation Touchscreen, keyboard**, mouse**, barcode reader**, remote via PC** Interface / Communication  RS232 (1x), USB A (4x), USB B (1x), Ethernet (1x), W-LAN/LAN** Conformity  International Pharmacopoea, OIML, ASTM, ICUMSA, Australian Standard K157  

ATR P

SPECIFICATIONS ATR-P Measuring scales Refractive Index (RI), Sucrose (%Brix)Up to 1000 scales freely definable Measuring range 1.32000 - 1.54000 RI / 100% Brix Resolution 0.00001 RI / 0.01% Brix Precision ± 0,00002 RI / ± 0.02% Brix Reproducibility ± 0.00001 RI / ± 0.01% Brix Ambient temperature + 10° to + 40°C Automatic temperature compensation + 5° to + 50°C Temperature measurement NTC sensor for measurement of sample temperature placed inside the prism Temperature controlTemperature range Temperature control prism / sample by external water bath5°C / 50°C Measurement mode Single sample or flow through measurement / horizontal or vertical usage Prism Sapphire Light source / wavelength LED, interference filter 589 nm Display 7" Touchscreen, 800 x 480 Pixel, 16 Bit colors Operation Touchscreen, keyboard**, mouse**, barcode reader**, remote via PC** Interfaces 1 x RS232 C serial, 3 x USB (A), 1 x USB (B), 1 x Ethernet, Easy connection of keyboard, mouse, printer, barcode reader,PC and network Conformity International Pharmacopoea, ASTM, AOAC, DIN, FDA, ICUMSA and others Highlights Robust stainless steel measuring head for rough enviroments; High performance and accuracy; Continuous measurement;ESH¹ chamber; MBS² as stand alone with L-Display or polarimeter; Easy calibration; GLP/GMP;With theL-Display: Maintenancefriendlybyremotediagnostic; Intuitive userhandling guided OPsystem; Installationwizard;Full traceability of records; Ext. LIMS integration; Huge storage for 1000 products each with 1000 methods; 21 CFR part 11ready conformity³1 Easy sample handling; ² Modular build-in-system; 3 Optional software module for the L-Display Weight / dimensions Measuring Head: 4.5 kg; 200 x 160 x 135 mm (width x depth x height)L-Display: 3.0 kg; 240 x 190 x 150 mm (width x depth x height)

Labfors 5 Cell

Elek Makinesi ve Elek Analizi Nedir?

Boyut dağılımı (size distribution), elek analizi (sieve analysis) ve Fritsch Analysette serisi hakkında bilgiler.

Chest Freezer Order No 6344

Applications Only a reliable cooling technology and a first-class insulation ensure trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi.

Upright Freezer Order No 6483

Only a reliable cooling technology and a first-class insulation ensure trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi.

Incubation/Inactivation Bath Order No 1105

Applications The Water Bath is successfully used for heating up medical compresses/hot packs as well as for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples

Orbital Shaker Order No 3020

Applications This powerful orbital shaker is preferably used for e. g. analytical or diagnostic applications in the pharmaceutical industry, chemistry, biology, in plant breeding or nutritional industry. It is well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C.

XRF Pellets – high throughput, high quality

32mm and 40mm pellet sizes Ejects pellet without awkward user handling Works seamlessly with Autotouch automatic press cycle Premium build material for durability Simple design for easy use

MMM Ecocell 404 - ECO line

Convincingly cost saving laboratory dryer 404-liter chamber volume Working temperature of from +5°C over ambient temperature up to 250/300°C Natural fine air flow in the chamber, noiseless operation High-quality and safe drying, heating and tempering of common laboratory materials in laboratories and industry High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display Wide range of optional equipment and accessories Output for a printer or PC connection Validation possibility (IQ , OQ)

MMM INCUCELL 404 - ECO line

Suitable for safe treatment of microbiological cultures. The INCUCELL line produces no noise and provides a very soft air flow within the chamber. These devices can be used especially in biological and microbiological laboratories, quality tests in pharmaceutical and cosmetic industry, and for testing in veterinary medicine and food industry. Internal volume: 22, 55, 111, 222, 404, and 707 liters Working temperature range: from 5°C above ambient temperature up to 100°C Inner glass door Inner chamber: Stainless steel DIN 1.4301 (AISI 304) Natural, precise – laboratory incubator 404-liter chamber volume Working temperature of from +5°C above ambient up to 100°C Noiseless operation and fine air flow in the chamber High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening High-quality and safe drying, heating and tempering of common laboratory materials in laboratories and industry; suitable for safe processing of microbiological cultures Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display Wide range of optional equipment and accessories Output for a printer or PC connection Validation possibility (IQ , OQ)   Technical data Interior of stainless steel material No. 1.4301 volume404 l depth520 mm width540 mm height1410 mm Tray standard equipment2 pcs storage area (w × d)520×485 mm racks19 max. number distance between guide rails70 mm Maximal weight of the load*) inside the oven100 kg/oven per tray30 kg/tray Door 1 pcs External dimensions (including door and handle) depth790 mm diameter of the air branch outer / inner52/49 mm width760 mm height, incl. Feet (N) and Rolls (K)1910 (K) Package dimensions (three layers carton) depth860 mm width830 mm depth2085 mm Weight brut175 kg nett150 kg Working temperature (beginning of the regulation) from 5 °C above ambient temp. to:100 °C Temperature accuracy according to DIN 12 880 T2 at working temperature with closed air flap and door time variation cca (±)<=0,2 °C space deviation cca (±)< 1 °C Time required to reach 37 °C with closed air flap and voltage 230 V 41 min Heat emission at 37 °C 65 W Air exchange speed at 37 °C 5 per hour Electricity - mains 50/60 Hz max. power0,9 kW nominal voltage230 V current3,9 A power by stand by5 W *) Approx. 50 % of the tray area can be filled in a way a uniform air circulation is enabled inside the chamber. Note: All technical data are related to 22 °C ambient temperature and +-10 % voltage swing (if not specified).

Z 207 M

The Microlitre Centrifuge, Z 207 M was designed specifically for small, compact spaces, suitable in any laboratory setting. The rapid acceleration allows short running time, with a max. speed of 13,500 rpm. Even with the high speed, this centrifuge is pleasantly quite. With this centrifuge, there is the option for a 24 x place mircolitre rotor, optional with hermetically sealed lid, and a rotor for Spin Column Kits. The highlight feature of the Z 207 M is, the "Touch Operation" function, of the control panel. Easy to operate, no need to remove gloves! A crucial detail is the Air Cooling System, which is designed to keep your samples cool, even at maximum speed.

Vacuum Control-Box VCB 521 es - 2

Technical Data More Information Article Number 600066 Dimensions (W/D/H) in mm 195/178/105 Range in mbar (Torr) 1100 - 1 Voltage 90...260VAC /24VDC Weight kg (lbs) 1,3

Multi-Range Vacuum Gauge MRV 100

Measuring instrument for use in the coarse, fine and high vacuum ranges Can only be used with sensor Digital measuring instrument USB interface and analog voltage output Well-arranged membrane keypad Two relays for programming setpoint values Can be used for controlling valves Display digital LED, height 10 mm Graphic display 60 x 18 mm Resolution 1 digit Read-out 10 per sec Thresholds 2 x 230 VAC1, 4 A Independent adjustable Switching accuracy/hysteresis +-1 Digit Power max. 20 W Vacuum connection depend on sensor Ambient conditions 0 - 40 °C and max. 90 % rh, 0 - 60 °C during storage

LAUDA Contact Angle Surface Analyzer LSA100

Wetting of surfaces and solid-liquid-interaction can be precisely measured with contact angle instruments. The LAUDA Surface Analysers series LSA 60, 100 and 200 can be adapted to any laboratory requirement. Especially the easy handling and the very comprehensive software support the daily routine in the laboratory and allow precise measurement results. LAUDA Scientific offers you innovative features such as simultaneous measurements in projection and top-view, telecentric lenses for research applications or non-contact dosing systems.

Rotary Vane Vacuum Pump- R-4SN

Features *Compact structure*Very good sealing*No returning throughput*Oil-spout prevention*Low noise*Oil-observation window*Handle for easy transportation*High flow rate*Low and stable ultimate vacuum*High evaporation resistance*Comparatively high chemical resistance*High longevity*Low maintenance rate*Low oil mist*Gas ballast valve*Overcurrent protection*Fulfills IP54 standards   Model R-4SN Number of Stages Single Flow Rate (L/min) 50 Ultimate Vacuum (mbar) 2.5 × 10-2 Power (W) 180 Motor rotation(RPM) 1400 Noise Level (dB) < 60 Oil Capacity (L) 0.25 IP Code IP40 Weight (kg) 13.5 Inlet and Outlet Specifications 5/8" SAE Male 7/16" SAE Male

ISF4-X (Climo-Shaker)

Kuhner ISF4-X inkübatör çalkalayıcı, mevcut sıcaklık, nem ve CO2 kontrolü ile büyük çalkalama kapasitesi sunar.

ATR BR

SPECIFICATIONS ATR-BR Measuring scales Refractive Index (RI), Sucrose (%Brix), others on request Measuring range 1.32000 - 1.54000 RI / 100% Brix Resolution 0.00001 RI / 0.01% Brix Precision Measuring range 1.32 - 1.44: ± 0.00002 RI / ± 0.01% Brix *Measuring range 1.44 - 1.54: ± 0.00003 RI / ± 0.01% Brix * Reproducibility ± 0.00001 RI / ± 0.01% Brix Ambient temperature + 10° to + 40°C Automatic temperature compensation + 5° to + 50°C Temperature measurement NTC sensor for measurement of sample temperature placed inside the prism Technical control sample No control Measurement mode Single measurement Prism Sapphire Light source / wavelength LED, interference filter 589 nm Display Back-lit LCD, 16 x 16 characters Operation 20 key membrane including function keys Interfaces 1 x RS232 C serial and parallel Standard model ATR-BR Conformity International Pharmacopoea, ASTM, AOAC, DIN, FDA, ICUMSA and others Highlights Stand alone device; high quality and precision; very stable measurements: user friendly operation;excellent price performance ratio, very flat and small sample room for easy cleaning

Labfors 5 Lux

Chest Freezer Order No 6345

Applications Only a reliable cooling technology and a first-class insulation ensure trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi.

Upright Freezer Order No 6485

Only a reliable cooling technology and a first-class insulation ensure trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi.

Incubation/Inactivation Bath Order No 1108

Applications The Water Bath is successfully used for incubations and inactivations of cultures, such as e.g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.

Orbital-Rocking Shaker Order No 3011

Applications In AIDS research, for diagnostic tests with test plates, or for growing cell cultures and micro-organisms this unit has become indispensable. The unit is well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C.

Pellet Press Dies | FTIR + XRF Dies

Ideal for producing high-quality pellets Evacuable for sample pellet clarity and quality Hardened Stainless Steel for durability Highly Polished Pellets Wide range of sizes and load capabilities Buy FTIR or XRF die

MMM Ecocell 707 - ECO line

Convincingly cost saving laboratory dryer 707-liter chamber volume Working temperature of from +5°C over ambient temperature up to 250/300°C Natural fine air flow in the chamber, noiseless operation High-quality and safe drying, heating and tempering of common laboratory materials in laboratories and industry High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display Wide range of optional equipment and accessories Output for a printer or PC connection Validation possibility (IQ , OQ)

MMM INCUCELL 707 - ECO line

Suitable for safe treatment of microbiological cultures. The INCUCELL line produces no noise and provides a very soft air flow within the chamber. These devices can be used especially in biological and microbiological laboratories, quality tests in pharmaceutical and cosmetic industry, and for testing in veterinary medicine and food industry. Internal volume: 22, 55, 111, 222, 404, and 707 liters Working temperature range: from 5°C above ambient temperature up to 100°C Inner glass door Inner chamber: Stainless steel DIN 1.4301 (AISI 304) Natural, precise – laboratory incubator 707-liter chamber volume Working temperature of from +5°C above ambient up to 100°C Noiseless operation and fine air flow in the chamber High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening High-quality and safe drying, heating and tempering of common laboratory materials in laboratories and industry; suitable for safe processing of microbiological cultures Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display Wide range of optional equipment and accessories Output for a printer or PC connection Validation possibility (IQ , OQ)   Technical data Interior of stainless steel material No. 1.4301 volume707 l depth520 mm width940 mm height1410 mm Tray standard equipment2 pcs storage area (w × d)920×485 mm racks19 max. number distance between guide rails70 mm Maximal weight of the load*) inside the oven130 kg/oven per tray50 kg/tray Door 2 pcs External dimensions (including door and handle) depth790 mm diameter of the air branch outer / inner52/49 mm width1160 mm height, incl. Feet (N) and Rolls (K)1910 (K) Package dimensions (three layers carton) depth860 mm width1230 mm depth2085 mm Weight brut240 kg nett215 kg Working temperature (beginning of the regulation) from 5 °C above ambient temp. to:100 °C Temperature accuracy according to DIN 12 880 T2 at working temperature with closed air flap and door time variation cca (±)<=0,2 °C space deviation cca (±)< 1,5 °C Time required to reach 37 °C with closed air flap and voltage 230 V 59 min Heat emission at 37 °C 85 W Air exchange speed at 37 °C 5 per hour Electricity - mains 50/60 Hz max. power0,9 kW nominal voltage230 V current3,9 A power by stand by5 W *) Approx. 50 % of the tray area can be filled in a way a uniform air circulation is enabled inside the chamber. Note: All technical data are related to 22 °C ambient temperature and +-10 % voltage swing (if not specified).

Centrifuge Z 167 M

he powerful and compact model Z 167 M is a replacement for our previous model Z 160 M. A brushless, maintenance free motor provides extremely fast acceleration and deceleration of the 18 place rotor. This Micro Centrifuge is supplied with the 18 place rotor for 1.5/2.0 ml tubes.

Digital Hot Plates-WH200D-1K

PID temperature control technology for accurate and reliable results  Suitable for complicated temperature control requirements  Bright LED screen can display both set value and actual temperature Convenient temperature setting via on-touch control  Timer function for automatic heating up to 100 hours Alarm signal output which can be applied to stop the operation of the hot plate and the other connected devices  External Pt100 temperature sensor connection for direct and precise control of the actual temperature  

LT-X (Lab-Therm)

İnkübatör çalkalayıcı, biyoteknoloji ve ilaç endüstrilerinin sallama ihtiyaçlarını karşılamak için özel olarak geliştirilmiştir.

Chest Freezer Order No 6380

Applications Only a reliable cooling technology and a first-class insulation ensure trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi.

Incubation/Inactivation Bath Order No 1112

Applications The Water Bath is successfully used for incubations and inactivations of cultures, such as e.g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.

Orbital-Rocking Shaker Order No 3012

Applications In AIDS research, for diagnostic tests with test plates, or for growing cell cultures and micro-organisms this unit has become indispensable. The unit is well-suited for use in laboratories, incubation and moderating rooms in ambient temperatures between +10 and +50 °C.

Spares + consumables for pellet dies | FTIR, KBr + XRF

Die Bases Die Extractor Rings Retainer Rings O-Rings Pellet Holders Die Spares

MMM Durocell 22 - ECO line

Highly durable laboratory oven 22-liter chamber volume Working temperature of from +5°C over ambient temperature up to 125°C Natural fine air flow in the chamber, noiseless operation High-quality and safe drying, heating and tempering of laboratory materials in laboratories and industry; perfect anticorrosive protection of all chamber parts (protective Epolon plastic) enabling wirk with acids and dases, acid and alkaline hydrolysis etc. High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display Wide range of optional equipment and accessories Output for a printer or PC connection Validation possibility (IQ , OQ)

MMM INCUCELL V 22 - ECO line

Suitable for safe processing of microbiological cultures. The INCUCELL V line (with a fan) ensures quicker and more precise temperature distribution with small deviations. These units are to be used especially in biological and microbiological laboratories. They can also be used for quality tests in the pharmaceutical industry and cosmetics, for testing in the veterinary medicine, and in the food industry. Inner volume of the chamber: 22, 55, 111, 222, 404, and 707 liters Working temperature: From 10°C above ambient temperature up to 100°C Inner glass door Inner chamber: Stainless steel, DIN 1.4301 (AISI 304) Natural, precise – laboratory incubator 22-liter chamber volume Working temperature of from +10°C above ambient up to 100°C Patented system of air flow in the chamber ensures quicker and more accurate distribution of the preset temperature in the chamber, which enables ideal heating of the samples High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening; the standard equipment includes inner glass door Model with a fan ensures quicker and more accurate distribution of temperature with small deviations; suitable for demanding and accurate tests and samples cultivation Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display Wide range of optional equipment and accessories Output for a printer or PC connection Validation possibility (IQ , OQ) Technical data Interior of stainless steel material No. 1.4301 volume22 l depth320 mm width240 mm height300 mm Tray standard equipment2 pcs storage area (w × d)185×265 mm racks4 max. number distance between guide rails60 mm Maximal weight of the load *) inside the oven25 kg/oven per tray10 kg/tray Door 1 pcs External dimensions (including door and handle) depth560 mm diameter of the air branch outer/inner52/49 mm width406 mm height, incl. Feet (N) and Rolls (K)610 (N) Package dimensions (three layers carton) depth720 mm width500 mm depth810 mm Weight brut36 kg nett31 kg Working temperature (beginning of the regulation) from 10 °C above ambient temp. to:100 °C Temperature accuracy according to DIN 12 880 T2 at working temperature with closed air flap and door time variation cca (±)0,1 °C space deviation cca (±)0,4 °C Time required to reach 37 °C with closed air flap and voltage 230 V 8 min Heat emission at 37 °C 70 W Air exchange speed at 37 °C 45 per hour Electricity - mains 50/60 Hz max. power0,96 kW nominal voltage230 V current4,2 A power by stand by5 W Note: All technical data are related to 22 °C of ambient temperature and ±10 % voltage swing rate ventilator 100 %, defrost off, lighting off.

Soxhlet 6-Plate Heater- WH-106

The distance between each hole is 55mm which is according to DIN 44548 and wide enough for users to handle the samples in back row conveniently. WH-106 contains six embedded heating plates with 85mm diameter, and its heating components are made in Germany, rugged and easy to maintain. Each plate with a heating indicato is controlled independently, and the temperature can reach 425℃ . For safety reason, each plate is surrounded by a rim for keeping electronics from spilling. The whole housing is made of stainless steel with paint coating.

Chest Freezer Order No 6381

Applications Only a reliable cooling technology and a first-class insulation ensure trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi.

Incubation/Inactivation Bath Order No 1113

Applications The Water Bath is successfully used for incubations and inactivations of cultures, such as e.g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.

Heated Platens | Electrically Powered

Controlled temperature to 300°C with water cooling 15 Ton load bearing capacity 100mm diameter pressing surface Compatible with all Specac Atlas Hydraulic Presses CE Safety approved

MMM Durocell 55 - ECO line

Highly durable laboratory oven 55-liter chamber volume Working temperature of from +5°C over ambient temperature up to 125°C Natural fine air flow in the chamber, noiseless operation High-quality and safe drying, heating and tempering of laboratory materials in laboratories and industry; perfect anticorrosive protection of all chamber parts (protective Epolon plastic) enabling wirk with acids and dases, acid and alkaline hydrolysis etc. High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display Wide range of optional equipment and accessories Output for a printer or PC connection Validation possibility (IQ , OQ)

MMM INCUCELL V 55 - ECO line

Suitable for safe processing of microbiological cultures. The INCUCELL V line (with a fan) ensures quicker and more precise temperature distribution with small deviations. These units are to be used especially in biological and microbiological laboratories. They can also be used for quality tests in the pharmaceutical industry and cosmetics, for testing in the veterinary medicine, and in the food industry. Inner volume of the chamber: 22, 55, 111, 222, 404, and 707 liters Working temperature: From 10°C above ambient temperature up to 100°C Inner glass door Inner chamber: Stainless steel, DIN 1.4301 (AISI 304) Natural, precise – laboratory incubator 55-liter chamber volume Working temperature of from +10°C above ambient up to 100°C Patented system of air flow in the chamber ensures quicker and more accurate distribution of the preset temperature in the chamber, which enables ideal heating of the samples High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening; the standard equipment includes inner glass door Model with a fan ensures quicker and more accurate distribution of temperature with small deviations; suitable for demanding and accurate tests and samples cultivation Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display Wide range of optional equipment and accessories Output for a printer or PC connection Validation possibility (IQ , OQ) Technical data Interior of stainless steel material No. 1.4301 volume55 l depth370 mm width400 mm height350 mm Tray standard equipment2 pcs storage area (w × d)380×335 mm racks4 max. number distance between guide rails70 mm Maximal weight of the load *) inside the oven50 kg/oven per tray20 kg/tray Door 1 pcs External dimensions (including door and handle) depth640 mm diameter of the air branch outer/inner52/49 mm width620 mm height, incl. Feet (N) and Rolls (K)680 (N) Package dimensions (three layers carton) depth730 mm width700 mm depth875 mm Weight brut66 kg nett55 kg Working temperature (beginning of the regulation) from 10 °C above ambient temp. to:100 °C Temperature accuracy according to DIN 12 880 T2 at working temperature with closed air flap and door time variation cca (±)<=0,2 °C space deviation cca (±)<=0,3 °C Time required to reach 37 °C with closed air flap and voltage 230 V 41 min Heat emission at 37 °C 80 W Air exchange speed at 37 °C 45 per hour Electricity - mains 50/60 Hz max. power0,7 kW nominal voltage230 V current3 A power by stand by5 W Note: All technical data are related to 22 °C of ambient temperature and ±10 % voltage swing rate ventilator 100 %, defrost off, lighting off.

Chest Freezer Order No 6382

Applications Only a reliable cooling technology and a first-class insulation ensure trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi.

Incubation/Inactivation Bath Order No 1002

Applications The Water Bath is successfully used for incubations and inactivations of cultures, such as e.g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.

Mini-Film Maker | Polymer Film Maker

Quick and reproducable thin film production Sample melt points from ambient to 250°C Standard film sizing rings of 50, 100, 250 & 500 microns Dedicated film maker accessory with hydraulic press and integrated heated platens

MMM Durocell 111 - ECO line

Highly durable laboratory oven 111-liter chamber volume Working temperature of from +5°C over ambient temperature up to 125°C Natural fine air flow in the chamber, noiseless operation High-quality and safe drying, heating and tempering of laboratory materials in laboratories and industry; perfect anticorrosive protection of all chamber parts (protective Epolon plastic) enabling wirk with acids and dases, acid and alkaline hydrolysis etc. High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display Wide range of optional equipment and accessories Output for a printer or PC connection Validation possibility (IQ , OQ)

MMM INCUCELL V 111 - ECO line

Suitable for safe processing of microbiological cultures. The INCUCELL V line (with a fan) ensures quicker and more precise temperature distribution with small deviations. These units are to be used especially in biological and microbiological laboratories. They can also be used for quality tests in the pharmaceutical industry and cosmetics, for testing in the veterinary medicine, and in the food industry. Inner volume of the chamber: 22, 55, 111, 222, 404, and 707 liters Working temperature: From 10°C above ambient temperature up to 100°C Inner glass door Inner chamber: Stainless steel, DIN 1.4301 (AISI 304) Natural, precise – laboratory incubator 111-liter chamber volume Working temperature of from +10°C above ambient up to 100°C Patented system of air flow in the chamber ensures quicker and more accurate distribution of the preset temperature in the chamber, which enables ideal heating of the samples High operation comfort, precise temperature regulation and short times of temperature recovery in the chamber after the door opening; the standard equipment includes inner glass door Model with a fan ensures quicker and more accurate distribution of temperature with small deviations; suitable for demanding and accurate tests and samples cultivation Model with a Fuzzy logic microprocessor control system; control elements situated on a foil keyboard, process information indicated on a LED display Wide range of optional equipment and accessories Output for a printer or PC connection Validation possibility (IQ , OQ) Technical data Interior of stainless steel material No. 1.4301 volume111 l depth370 mm width540 mm height530 mm Tray standard equipment2 pcs storage area (w × d)520×335 mm racks7 max. number distance between guide rails70 mm Maximal weight of the load *) inside the oven50 kg/oven per tray20 kg/tray Door 1 pcs External dimensions (including door and handle) depth640 mm diameter of the air branch outer/inner52/49 mm width760 mm height, incl. Feet (N) and Rolls (K)860 (N) Package dimensions (three layers carton) depth730 mm width830 mm depth1060 mm Weight brut87 kg nett75 kg Working temperature (beginning of the regulation) from 10 °C above ambient temp. to:100 °C Temperature accuracy according to DIN 12 880 T2 at working temperature with closed air flap and door time variation cca (±)<=0,2 °C space deviation cca (±)<=0,3 °C Time required to reach 37 °C with closed air flap and voltage 230 V 51 min Heat emission at 37 °C 95 W Air exchange speed at 37 °C 49 per hour Electricity - mains 50/60 Hz max. power0,7 kW nominal voltage230 V current3 A power by stand by5 W Note: All technical data are related to 22 °C of ambient temperature and ±10 % voltage swing rate ventilator 100 %, defrost off, lighting off.

Chest Freezer Order No 6383

Applications Only a reliable cooling technology and a first-class insulation ensure trouble-free long-term storage of cell lines, human, animal and plant tissues, fractions of the blood, vaccines, or reference cultures of micro-organisms, such as bacteria, yeasts, viruses and fungi.